[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003bff0000 (usable) [ 0.000000] BIOS-e820: 000000003bff0000 - 000000003bff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003bff3000 - 000000003c000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] 63MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 245744) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 245744 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 245744 [ 0.000000] On node 0 totalpages: 245744 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 127 pages used for memmap [ 0.000000] HighMem zone: 16241 pages, LIFO batch:3 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F7490 checksum 0 [ 0.000000] ACPI: RSDP 000F7490, 0014 (r0 P4M80P) [ 0.000000] ACPI: RSDT 3BFF3040, 0028 (r1 P4M80P AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 3BFF30C0, 0074 (r1 P4M80P AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 3BFF3180, 42E6 (r1 P4M80P AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 3BFF0000, 0040 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3c000000:c3ff0000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243825 [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- [ 0.000000] No local APIC present or hardware disabled [ 0.000000] mapped APIC to ffffb000 (0178e000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1197.106 MHz processor. [ 25.594195] Console: colour VGA+ 80x25 [ 25.594204] console [tty0] enabled [ 25.595273] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 25.596962] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 25.678429] Memory: 962216k/982976k available (2157k kernel code, 20256k reserved, 998k data, 364k init, 65472k highmem) [ 25.678454] virtual kernel memory layout: [ 25.678457] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 25.678461] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 25.678465] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 25.678469] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 25.678473] .init : 0xc041b000 - 0xc0476000 ( 364 kB) [ 25.678477] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB) [ 25.678481] .text : 0xc0100000 - 0xc031b5a4 (2157 kB) [ 25.678491] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 25.678591] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 25.758594] Calibrating delay using timer specific routine.. 2397.26 BogoMIPS (lpj=4794522) [ 25.758659] Security Framework initialized [ 25.758674] SELinux: Disabled at boot. [ 25.758724] AppArmor: AppArmor initialized [ 25.758735] Failure registering capabilities with primary security module. [ 25.758755] Mount-cache hash table entries: 512 [ 25.759032] CPU: After generic identify, caps: a7c9b9ff 00000000 00000000 00000000 00000101 00000000 00000000 00000000 [ 25.759055] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 25.759063] CPU: L2 Cache: 128K (64 bytes/line) [ 25.759069] CPU: After all inits, caps: 27c9b9ff 00000000 00000000 00000000 00000101 00003fcc 00000000 00000000 [ 25.759092] Compat vDSO mapped to ffffe000. [ 25.759121] Checking 'hlt' instruction... OK. [ 25.775113] SMP alternatives: switching to UP code [ 25.777313] Freeing SMP alternatives: 11k freed [ 25.777615] Early unpacking initramfs... done [ 26.793742] ACPI: Core revision 20070126 [ 26.793905] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 26.798631] ACPI: setting ELCR to 0200 (from 0e20) [ 26.801588] CPU0: Centaur VIA Esther processor 1200MHz stepping 09 [ 26.801610] SMP motherboard not detected. [ 26.801617] Local APIC not detected. Using dummy APIC emulation. [ 26.801713] Brought up 1 CPUs [ 26.801757] CPU0 attaching sched-domain: [ 26.801764] domain 0: span 01 [ 26.801769] groups: 01 [ 26.802240] net_namespace: 64 bytes [ 26.802256] Booting paravirtualized kernel on bare hardware [ 26.803358] Time: 0:20:05 Date: 01/01/03 [ 26.803420] NET: Registered protocol family 16 [ 26.803822] EISA bus registered [ 26.803851] ACPI: bus type pci registered [ 26.812218] PCI: PCI BIOS revision 2.10 entry at 0xf9310, last bus=1 [ 26.812226] PCI: Using configuration type 1 [ 26.812231] Setting up standard PCI resources [ 26.823484] ACPI: EC: Look up EC in DSDT [ 26.833978] ACPI: Interpreter enabled [ 26.833994] ACPI: (supports S0 S1 S4 S5) [ 26.834033] ACPI: Using PIC for interrupt routing [ 26.844712] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 26.846173] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 26.904057] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12) [ 26.904405] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12) [ 26.904753] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5 [ 26.905062] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 26.905359] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 26.905644] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 26.905929] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 26.906253] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. [ 26.906531] Linux Plug and Play Support v0.97 (c) Adam Belay [ 26.906605] pnp: PnP ACPI init [ 26.906627] ACPI: bus type pnp registered [ 26.912894] pnp: PnP ACPI: found 12 devices [ 26.912903] ACPI: ACPI bus type pnp unregistered [ 26.912914] PnPBIOS: Disabled by ACPI PNP [ 26.913393] PCI: Using ACPI for IRQ routing [ 26.913402] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 26.930112] NET: Registered protocol family 8 [ 26.930118] NET: Registered protocol family 20 [ 26.930273] AppArmor: AppArmor Filesystem Enabled [ 26.934011] Time: tsc clocksource has been installed. [ 26.942097] system 00:00: iomem range 0xf0000-0xf3fff could not be reserved [ 26.942106] system 00:00: iomem range 0xf4000-0xf7fff could not be reserved [ 26.942115] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved [ 26.942123] system 00:00: iomem range 0xfc000-0xfffff could not be reserved [ 26.942132] system 00:00: iomem range 0x3bff0000-0x3bffffff could not be reserved [ 26.942142] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved [ 26.942150] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 26.942159] system 00:00: iomem range 0x100000-0x3bfeffff could not be reserved [ 26.942168] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved [ 26.942178] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved [ 26.942198] system 00:02: ioport range 0x400-0x47f has been reserved [ 26.942206] system 00:02: ioport range 0x500-0x50f has been reserved [ 26.942225] system 00:03: ioport range 0x4d0-0x4d1 has been reserved [ 26.942234] system 00:03: ioport range 0x294-0x297 has been reserved [ 26.973090] PCI: Bridge: 0000:00:01.0 [ 26.973098] IO window: d000-dfff [ 26.973108] MEM window: fb000000-fcffffff [ 26.973116] PREFETCH window: f4000000-f7ffffff [ 26.973145] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 26.973181] NET: Registered protocol family 2 [ 27.010178] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 27.010948] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 27.013396] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 27.014688] TCP: Hash tables configured (established 131072 bind 65536) [ 27.014699] TCP reno registered [ 27.026351] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0 [ 27.986184] it is [ 29.026850] Freeing initrd memory: 7665k freed [ 29.027826] audit: initializing netlink socket (disabled) [ 29.027857] audit(1041380407.352:1): initialized [ 29.028260] highmem bounce pool size: 64 pages [ 29.032256] VFS: Disk quotas dquot_6.5.1 [ 29.032438] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 29.032746] io scheduler noop registered [ 29.032752] io scheduler anticipatory registered [ 29.032758] io scheduler deadline registered [ 29.032786] io scheduler cfq registered (default) [ 29.032823] PCI: VIA PCI bridge detected. Disabling DAC. [ 29.032968] PCI: Bypassing VIA 8237 APIC De-Assert Message [ 29.032985] Boot video device is 0000:01:00.0 [ 29.033572] isapnp: Scanning for PnP cards... [ 29.387961] isapnp: No Plug & Play device found [ 29.452849] Real Time Clock Driver v1.12ac [ 29.453061] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 29.453248] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 29.454615] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 29.456193] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 29.456361] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 29.456582] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 29.457064] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 29.457076] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 29.468963] mice: PS/2 mouse device common for all mice [ 29.469222] EISA: Probing bus 0 at eisa.0 [ 29.469282] EISA: Detected 0 cards. [ 29.469290] cpuidle: using governor ladder [ 29.469295] cpuidle: using governor menu [ 29.469571] NET: Registered protocol family 1 [ 29.469644] Using IPI No-Shortcut mode [ 29.469716] registered taskstats version 1 [ 29.470005] Magic number: 3:309:303 [ 29.470342] hash matches device tty32 [ 29.470428] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 29.470434] EDD information not available. [ 29.471178] Freeing unused kernel memory: 364k freed [ 29.490002] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 31.258553] fuse init (API version 7.9) [ 31.318213] ACPI: Fan [FAN] (on) [ 31.340285] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 31.340302] ACPI: Processor [CPU0] (supports 2 throttling states) [ 31.344837] ACPI: Thermal Zone [THRM] (65 C) [ 32.926742] SCSI subsystem initialized [ 33.010309] usbcore: registered new interface driver usbfs [ 33.010366] usbcore: registered new interface driver hub [ 33.087633] usbcore: registered new device driver usb [ 33.166864] USB Universal Host Controller Interface driver v3.0 [ 33.167867] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 33.167875] PCI: setting IRQ 10 as level-triggered [ 33.167885] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 33.167914] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 33.168795] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 33.168842] uhci_hcd 0000:00:10.0: irq 10, io base 0x0000f900 [ 33.169150] usb usb1: configuration #1 chosen from 1 choice [ 33.169202] hub 1-0:1.0: USB hub found [ 33.169215] hub 1-0:1.0: 2 ports detected [ 33.198761] libata version 3.00 loaded. [ 33.271021] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 33.271053] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 33.271107] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 33.271145] uhci_hcd 0000:00:10.1: irq 10, io base 0x0000f800 [ 33.271398] usb usb2: configuration #1 chosen from 1 choice [ 33.271449] hub 2-0:1.0: USB hub found [ 33.271461] hub 2-0:1.0: 2 ports detected [ 33.376261] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 33.376272] PCI: setting IRQ 11 as level-triggered [ 33.376282] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 33.376309] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 33.376369] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 33.376412] uhci_hcd 0000:00:10.2: irq 11, io base 0x0000f700 [ 33.376676] usb usb3: configuration #1 chosen from 1 choice [ 33.376729] hub 3-0:1.0: USB hub found [ 33.376742] hub 3-0:1.0: 2 ports detected [ 33.478872] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 33.478904] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 33.478958] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 33.478997] uhci_hcd 0000:00:10.3: irq 11, io base 0x0000f600 [ 33.479254] usb usb4: configuration #1 chosen from 1 choice [ 33.479306] hub 4-0:1.0: USB hub found [ 33.479319] hub 4-0:1.0: 2 ports detected [ 33.590718] sata_via 0000:00:0f.0: version 2.3 [ 33.590776] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 33.590875] sata_via 0000:00:0f.0: routed to hard irq line 11 [ 33.621045] scsi0 : sata_via [ 33.695033] scsi1 : sata_via [ 33.695185] ata1: SATA max UDMA/133 cmd 0xff00 ctl 0xfe00 bmdma 0xfb00 irq 11 [ 33.695194] ata2: SATA max UDMA/133 cmd 0xfd00 ctl 0xfc00 bmdma 0xfb08 irq 11 [ 33.894932] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 33.898452] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 34.034386] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker [ 34.034403] via-rhine: Broken BIOS detected, avoid_D3 enabled. [ 34.066061] usb 2-2: configuration #1 chosen from 1 choice [ 34.110322] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) [ 34.121567] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 34.121585] PCI: VIA VLink IRQ fixup for 0000:00:0f.1, from 255 to 10 [ 34.121710] ACPI: PCI interrupt for device 0000:00:0f.1 disabled [ 34.127844] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 34.127856] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 34.127872] PCI: VIA VLink IRQ fixup for 0000:00:10.4, from 5 to 11 [ 34.127913] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 34.128009] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 [ 34.128088] ehci_hcd 0000:00:10.4: irq 11, io mem 0xfdfff000 [ 34.138262] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 34.138579] usb usb5: configuration #1 chosen from 1 choice [ 34.138633] hub 5-0:1.0: USB hub found [ 34.138648] hub 5-0:1.0: 8 ports detected [ 34.242808] pata_via 0000:00:0f.1: version 0.3.3 [ 34.242858] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 34.261319] scsi2 : pata_via [ 34.277741] scsi3 : pata_via [ 34.280560] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 34.280571] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 34.603039] ata3.01: ATA-0: ST51270A, 03.03.06, max MWDMA2 [ 34.603051] ata3.01: 2504880 sectors, multi 0: LBA [ 34.634331] ata3.01: configured for MWDMA2 [ 34.690299] ata3.01: configured for MWDMA2 [ 34.690321] ata3: EH complete [ 34.822011] usb 5-4: new high speed USB device using ehci_hcd and address 2 [ 34.955043] usb 5-4: configuration #1 chosen from 1 choice [ 34.955415] usb 2-2: USB disconnect, address 2 [ 35.010268] ata4.00: ATAPI: SONY CD-RW CRX210E1, 2YS1, max UDMA/33 [ 35.182096] ata4.00: configured for UDMA/33 [ 35.182347] scsi 2:0:1:0: Direct-Access ATA ST51270A 03.0 PQ: 0 ANSI: 5 [ 35.183010] scsi 3:0:0:0: CD-ROM SONY CD-RW CRX210E1 2YS1 PQ: 0 ANSI: 5 [ 35.183550] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 35.188111] eth0: VIA Rhine II at 0xfdffe000, 00:40:63:c6:0b:1b, IRQ 10. [ 35.188829] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. [ 36.453686] usbcore: registered new interface driver libusual [ 36.477125] Initializing USB Mass Storage driver... [ 36.481349] scsi4 : SCSI emulation for USB Mass Storage devices [ 36.486032] usbcore: registered new interface driver usb-storage [ 36.486047] USB Mass Storage support registered. [ 36.486348] usb-storage: device found at 2 [ 36.486354] usb-storage: waiting for device to settle before scanning [ 36.584536] Driver 'sd' needs updating - please use bus_type methods [ 36.584721] sd 2:0:1:0: [sda] 2504880 512-byte hardware sectors (1282 MB) [ 36.584747] sd 2:0:1:0: [sda] Write Protect is off [ 36.584755] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 36.584788] sd 2:0:1:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 36.584891] sd 2:0:1:0: [sda] 2504880 512-byte hardware sectors (1282 MB) [ 36.584910] sd 2:0:1:0: [sda] Write Protect is off [ 36.584917] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 36.584947] sd 2:0:1:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 36.585035] sda: sda1 sda2 [ 36.597378] Driver 'sr' needs updating - please use bus_type methods [ 36.600808] sd 2:0:1:0: [sda] Attached SCSI disk [ 36.616143] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 36.616158] Uniform CD-ROM driver Revision: 3.20 [ 36.616290] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 36.619239] sd 2:0:1:0: Attached scsi generic sg0 type 0 [ 36.619288] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 37.382187] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 37.413595] ISO 9660 Extensions: RRIP_1991A [ 37.650507] Registering unionfs 1.4 [ 37.650519] unionfs: debugging is not enabled [ 37.688836] loop: module loaded [ 37.981106] squashfs: version 3.3 (2007/10/31) Phillip Lougher [ 41.482627] usb-storage: device scan complete [ 41.483219] scsi 4:0:0:0: Direct-Access SanDisk Cruzer 7.01 PQ: 0 ANSI: 0 CCS [ 41.496478] sd 4:0:0:0: [sdb] 15745023 512-byte hardware sectors (8061 MB) [ 41.497204] sd 4:0:0:0: [sdb] Write Protect is off [ 41.497217] sd 4:0:0:0: [sdb] Mode Sense: 45 00 00 08 [ 41.497225] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 41.499436] sd 4:0:0:0: [sdb] 15745023 512-byte hardware sectors (8061 MB) [ 41.500043] sd 4:0:0:0: [sdb] Write Protect is off [ 41.500052] sd 4:0:0:0: [sdb] Mode Sense: 45 00 00 08 [ 41.500059] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 41.500075] sdb: sdb1 [ 41.501282] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 41.501383] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 103.946051] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 104.071058] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 104.351230] Linux agpgart interface v0.102 [ 104.526206] agpgart: Detected VIA VT3314 chipset [ 104.639535] agpgart: AGP aperture is 128M @ 0xe8000000 [ 107.424582] input: Power Button (FF) as /devices/virtual/input/input2 [ 107.440144] ACPI: Power Button (FF) [PWRF] [ 107.440434] input: Power Button (CM) as /devices/virtual/input/input3 [ 107.460732] ACPI: Power Button (CM) [PWRB] [ 107.460980] input: Sleep Button (CM) as /devices/virtual/input/input4 [ 107.476106] ACPI: Sleep Button (CM) [SLPB] [ 110.059100] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 115.170633] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 115.170653] PCI: VIA VLink IRQ fixup for 0000:00:11.5, from 5 to 11 [ 115.170819] PCI: Setting latency timer of device 0000:00:11.5 to 64 [ 115.655637] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6 [ 115.931556] parport_pc 00:09: reported by Plug and Play ACPI [ 115.931621] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 124.016267] ip_tables: (C) 2000-2006 Netfilter Core Team [ 125.951630] No dock devices found. [ 128.256186] longhaul: Use acpi-cpufreq driver for VIA C7 [ 132.325476] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 132.325491] apm: overridden by ACPI. [ 132.658122] lp0: using parport0 (interrupt-driven). [ 132.790432] ppdev: user-space parallel port driver [ 139.735992] eth0: link down [ 140.126765] Bluetooth: Core ver 2.11 [ 140.128729] NET: Registered protocol family 31 [ 140.128743] Bluetooth: HCI device and connection manager initialized [ 140.128755] Bluetooth: HCI socket layer initialized [ 140.247116] Bluetooth: L2CAP ver 2.9 [ 140.247129] Bluetooth: L2CAP socket layer initialized [ 140.514580] Bluetooth: RFCOMM socket layer initialized [ 140.514617] Bluetooth: RFCOMM TTY layer initialized [ 140.514623] Bluetooth: RFCOMM ver 1.8 [ 148.042365] [drm] Initialized drm 1.1.0 20060810 [ 148.086884] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 148.087912] [drm] Initialized via 2.11.1 20070202 on minor 0 [ 148.102464] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. [ 148.103716] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [ 148.104690] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [ 160.155520] NET: Registered protocol family 10 [ 160.157063] lo: Disabled Privacy Extensions [ 160.158765] ADDRCONF(NETDEV_UP): eth0: link is not ready